Hybrid-solar-inverter maintenance service in uttara, Dhaka

About Hybrid Solar Inverter

In UTL Hybrid solar inverter is a multi functional inverter which combines the functions and capabilities of both grid-tie and off-grid solar inverters. A hybrid solar inverter is like an electronic heartbeat of a solar system that connects solar arrays to the utility grid and increasingly to the battery storage. One side, it stores the electricity into the solar battery for crucial times and on the other side, it will exports the excess or unconsumed electricity to the utility grid. The energy generated by solar arrays flows into the hybrid solar inverter where it will be converted immediately into alternating current (AC) to be uses in homes and supply to the grid.

UTL Hybrid Solar Inverter
UTL Hybrid Solar Inverter

A hybrid solar inverter provides all in one solution you need for solar with storage backup power. If you have an unreliable grid or if you want to lower your electricity bills or generate your own power then you should install a good quality hybrid solar inverter i.e. Sigma+ Hybrid Solar Inverter.

Sigma+ hybrid solar inverter is a premium quality hybrid solar inverter by UTL with an energy management system that intelligently calculates generation and consumption in real-time. It calculates the actual load for local consumption and stores the surplus into the batteries for later use. As day turns to night, the solar panels will cease to produce energy at which points your Sigma+ hybrid solar inverter will automatically fulfill the consumption within the house from battery stored energy. In case, your consumption exceeds what the batteries are able to supply then it will automatically switch over to the utility grid and continue to operate.

Sigma+ Grid Export Solar PCU

UTL hybrid Solar inverter has only one inverter named Sigma + Grid Export Solar PCU. It is solar power conditioning unit which is a single phase output solar inverter system. It works as a Bi-directional inverter which means power will be exported into the grid or power will be imported from the Grid.

Sigma Hybrid Solar Inverter
Sigma Hybrid Solar Inverter

The Sigma+ PCU work in two operates condition:

  1. Stand-alone
  2. Grid Interactive

Stand-alone: Solar Inverter operates from solar battery and produces AC output. The solar battery charged by solar power in first priority and from grid second priority.

Grid Interactive: Solar inverter operates from solar battery and produces AC output and also operates in parallel with the grid supply. Any excess solar power will be exported into the grid. Whenever sufficient solar power is not available to run the load, the required power is shared from the grid. The maximum power feed into the grid is depends on the system rating.

UTL Hybrid Solar Inverter Range

Sigma+ hybrid solar inverter is a single-phase, Bi-directional solar inverter with high efficiency that provides you uninterrupted power support during nights and power outages. Therefore, we offer a complete range of Sigma+ hybrid solar inverter from 1kVA to 15kVA power rating that meets all your requirements. Moreover, install Sigma+ hybrid solar inverter and experience the green energy & save on electricity charges.

Hybrid Solar Inverter ModelMRP ( Inclusive of all Taxes )Discounted Price ( Inclusive of all Taxes )
1kVA 48V Solar Inverter
2kVA 48V Solar Inverter
3kVA 48V Solar Inverter
4kVA 48V Solar Inverter
5kVA 96V Solar Inverter
7.5kVA 120V Solar Inverter
10kVA 120V Solar Inverter
10kVA 180V Solar Inverter
15kVA 240V Solar Inverter

 

Technical Details of 1kVA Sigma+

ParticularsDescription
Solar PCU Capacity1kVA 24V
Input Voltage Range45-90VOC
Maximum PV power recommended1kW
ControllerDSP
Type of ChargerMPPT
Peak Efficiency95%
Battery Low Buzzer10-11.7V
Battery Charging Voltage with SPV13.5-16V
Battery Charging Current with SPV20-60A (Optional) / 2-23 (Regular)
Battery Charging Voltage with Grid13-15.5V
Battery Charging Current with Grid10-30A (Optional) / 1-16 (Regular)
Grid ChargingEnable/Disable
IT LoadEnable/Disable
Operating modeSmart/PCU/Hybrid/Grid Export
Input SourceGrid/Genset(for Genset, Grid Export Mode must be Disable)
Output voltage low170-190V
Output voltage high250-260V
No load shutdownEnable/Disable
Grid Low/recover185/195V
Grid High/recover280/275V
Synchronization voltage range185-280V
Synchronization frequency range47 to 53Hz
Maximum Charging Current from Grid1-16A
Grid Disconnect (Solar Available) PCU/SMART@14.5V/Battery for 2 minutes OR 13.5V/Battery-100% Current (if Grid Chg. Volt. Ref. set to 14.2V)
Temp. Compensation@ 3mV/cell/°C; 18mV/Battery/°C
ControlPWM
Nominal Output voltage220
Output supply phase1Phase, 3 Wire
Output waveformPure Sine Wave
Nominal frequency50Hz
Load Current4.5A
Voltage regulation1%
Output voltage distortion with 100% linear load<3%
Noise @ 1 meter50 dB
CoolingTemp. Controlled Fan
Operating temperature0-50 ºC
Max. Relative Humidity @ 25 C (non condensing)95%
Degree of ProtectionIP-21
Dimension (LxWxH)381x406x381 mm
Weight (Approx)30Kg
MRP ( Inclusive of all Taxes )
Discounted Price ( Inclusive of all Taxes )

Technical Details of 5kVA Sigma+

ParticularsDescription
Solar PCU Capacity5kVA 96V
Input Voltage Range160-450VOC
Maximum PV power recommended5kW
ControllerDSP
Type of ChargerMPPT
Peak Efficiency95%
Battery Low Buzzer10-11.7V
Battery Charging Voltage with SPV13.5-16V
Battery Charging Current with SPV20-60A (Optional) / 2-23 (Regular)
Battery Charging Voltage with Grid13-15.5V
Battery Charging Current with Grid10-30A (Optional) / 1-16 (Regular)
Grid ChargingEnable/Disable
IT LoadEnable/Disable
Operating modeSmart/PCU/Hybrid/Grid Export
Input SourceGrid/Genset(for Genset, Grid Export Mode must be Disable)
Output voltage low170-190V
Output voltage high250-260V
No load shutdownEnable/Disable
Grid Low/recover185/195V
Grid High/recover280/275V
Synchronization voltage range185-280V
Synchronization frequency range47 to 53Hz
Maximum Charging Current from Grid1-16A
Grid Disconnect (Solar Available) PCU/SMART@14.5V/Battery for 2 minutes OR 13.5V/Battery-100% Current (if Grid Chg. Volt. Ref. set to 14.2V)
Temp. Compensation@ 3mV/cell/°C; 18mV/Battery/°C
ControlPWM
Nominal Output voltage220
Output supply phase1Phase, 3 Wire
Output waveformPure Sine Wave
Nominal frequency50Hz
Load Current18A
Voltage regulation1%
Output voltage distortion with 100% linear load<3%
Noise @ 1 meter50 dB
CoolingTemp. Controlled Fan
Operating temperature0-50 ºC
Max. Relative Humidity @ 25 C (non condensing)95%
Degree of ProtectionIP-21
Dimension (LxWxH)584 x 330 x 660 mm
Weight (Approx)70Kg
MRP ( Inclusive of all Taxes )
Discounted Price ( Inclusive of all Taxes )

Technical Details of 10kVA Sigma+

ParticularsDescription
Solar PCU Capacity10kVA 180V
Input Voltage Range300-625 VOC
Maximum PV power recommended10kW
ControllerDSP
Type of ChargerMPPT
Peak Efficiency95%
Battery Low Buzzer10-11.7V
Battery Charging Voltage with SPV13.5-16V
Battery Charging Current with SPV20-60A (Optional) / 2-23 (Regular)
Battery Charging Voltage with Grid13-15.5V
Battery Charging Current with Grid10-30A (Optional) / 1-16 (Regular)
Grid ChargingEnable/Disable
IT LoadEnable/Disable
Operating modeSmart/PCU/Hybrid/Grid Export
Input SourceGrid/Genset(for Genset, Grid Export Mode must be Disable)
Output voltage low170-190V
Output voltage high250-260V
No load shutdownEnable/Disable
Grid Low/recover185/195V
Grid High/recover280/275V
Synchronization voltage range185-280V
Synchronization frequency range47 to 53Hz
Maximum Charging Current from Grid1-16A
Grid Disconnect (Solar Available) PCU/SMART@14.5V/Battery for 2 minutes OR 13.5V/Battery-100% Current (if Grid Chg. Volt. Ref. set to 14.2V)
Temp. Compensation@ 3mV/cell/°C; 18mV/Battery/°C
ControlPWM
Nominal Output voltage220
Output supply phase1Phase, 3 Wire
Output waveformPure Sine Wave
Nominal frequency50Hz
Load Current36A
Voltage regulation1%
Output voltage distortion with 100% linear load<3%
Noise @ 1 meter50 dB
CoolingTemp. Controlled Fan
Operating temperature0-50 ºC
Max. Relative Humidity @ 25 C (non condensing)95%
Degree of ProtectionIP-21
Dimension (LxWxH)584 x 330 x 660 mm
Weight (Approx)103Kg
MRP ( Inclusive of all Taxes )
Discounted Price ( Inclusive of all Taxes )

Technical Details of 15kVA Sigma+

ParticularsDescription
Solar PCU Capacity15kVA 240V
Input Voltage Range400-750 VOC
Maximum PV power recommended10kW
ControllerDSP
Type of ChargerMPPT
Peak Efficiency95%
Battery Low Buzzer10-11.7V
Battery Charging Voltage with SPV13.5-16V
Battery Charging Current with SPV20-60A (Optional) / 2-23 (Regular)
Battery Charging Voltage with Grid13-15.5V
Battery Charging Current with Grid10-30A (Optional) / 1-16 (Regular)
Grid ChargingEnable/Disable
IT LoadEnable/Disable
Operating modeSmart/PCU/Hybrid/Grid Export
Input SourceGrid/Genset(for Genset, Grid Export Mode must be Disable)
Output voltage low170-190V
Output voltage high250-260V
No load shutdownEnable/Disable
Grid Low/recover185/195V
Grid High/recover280/275V
Synchronization voltage range185-280V
Synchronization frequency range47 to 53Hz
Maximum Charging Current from Grid1-16A
Grid Disconnect (Solar Available) PCU/SMART@14.5V/Battery for 2 minutes OR 13.5V/Battery-100% Current (if Grid Chg. Volt. Ref. set to 14.2V)
Temp. Compensation@ 3mV/cell/°C; 18mV/Battery/°C
ControlPWM
Nominal Output voltage220
Output supply phase1Phase, 3 Wire
Output waveformPure Sine Wave
Nominal frequency50Hz
Load Current54A
Voltage regulation1%
Output voltage distortion with 100% linear load<3%
Noise @ 1 meter50 dB
CoolingTemp. Controlled Fan
Operating temperature0-50 ºC
Max. Relative Humidity @ 25 C (non condensing)95%
Degree of ProtectionIP-21
Dimension (LxWxH)660x330x660 mm
Weight (Approx)103Kg
MRP ( Inclusive of all Taxes )
Discounted Price ( Inclusive of all Taxes )

Silent Features

UTL’s Sigma+ hybrid solar inverter with the stand-alone and grid-interactive mode is not only best in price but they are also best in the quality as well. It is designed and manufactured with robust technology that gave it a unique look. Rather than its unique look, its other various features provide you a suitable and eco-friendly power backup that reduces carbon emission. Let’s have a look over these amazing features.

  • Firstly, DSP based unique pure sine wave design.
  • Secondly, inbuilt high-efficiency rMPPT charge controller.
  • Stand-alone & grid-interactive working modes.
  • IEC 61683, 61727, 60529, 60068-2 (1,2,14,30) & 62116 certified.
  • Inbuilt AC & DC energy meter with USB based communication.
  • GSM/GPRS based remote monitoring & controlling (Optional).
  • LCD display with all AC and DC parameters.
  • Robust design with reverse AC voltage protection.
  • Priority-based working modes – Smart/PCU/Hybrid.
  • Maximum preference for solar power.
  • 20 years of product life & 2-5 years warranty.
  • Easy to install, maintain & access.

FAQs

What is a hybrid solar inverter?

A hybrid solar inverter is a combination of both grid-tie and off-grid solar inverter. It transforms the DC form of electricity into AC and powers your appliances. It can charge solar batteries as well as export to the utility grid.

 

What capacity Sigma+ solar inverter should I buy for my home?

The actual capacity of a solar inverter depends upon your power consumption. For high power requirements, go for high capacity solar inverters otherwise you can install a low capacity solar inverter.

 

What is the estimated life of Sigma+ solar inverter?

The estimated life of Sigma+ hybrid solar inverter is around 20 years.

 

Does it work during a power outage?

Yes, of course, it definitely works during power outages.

 

What is the price of a 5kVA Sigma+ hybrid solar inverter?

Therefore, the Discounted Price ( Inclusive of all Taxes ) of 5kVA Sigma+ hybrid solar inverter is just Rs. 88,635.

 

Can I run a fridge and a cooler on 3kVA hybrid solar inverter?

Certainly, you can power your fridge and cooler with 3kVA hybrid solar inverter.

 

Is there any warranty on this product?

Obviously, yes, there is a 5-year product warranty on our hybrid solar inverter.

25

administrator

Tania

Comments (No Comments)

Comments (0):

Submit Your Comment

Your email address will not be published. Required fields are marked *